The Emlid Reach RX is a great GPS receiver for when you want to start land surveying. It works great with Apglos Survey Wizard.
Connecting Emlid Reach RX with Apglos Survey Wizard
It is very easy to connect Apglos Survey Wizard with the Emlid Reach RX GPS receiver. It can really be done withing 5 minutes from taking it out of the box. Of course we advise you to charge the Emlid Reach RX first. Check out the video to see how easy it is.
That it is that easy makes sure that this GNSS receiver in combination with Aglos Survey Wizard is a great combination for GPS land surveying.
The Emlid Reach RX is the most easy to use GNSS receiver we every tried. You only have to turn it on and you can land survey with it. There is no configuration needed, like with his big brother the Emlid Reach RS2+.
Taking out all the extra possibilities by Emlid with this GNSS receiver made this product unique. It is the must have for everyone that wants to start land surveying, but that does not know enough to configure a complete GNSS receiver.
Another key feature is the size of this GNSS reeiver. It is very small. You can put it in a pocket of your jeans. You can take it with you anywhere without needing a big bag.
Since it is small it is also very light. When you want to land survey a complete day, which you can with this GNSS receiver, then it is not heavy to use. Even when you are not used to land survey every day then you will be able to land survey with this light and small GNSS receiver.
The size makes it also easy to land survey close against walls and fences.
Further and also very important is that the Emlid Reach RX is engineered to be tough. It will work in the most challenging conditions.
Specifications of Emlid Reach RX
Here are the specifications of this GPS receiver:
- Dimensions: 51x51x172 mm
- Weight: 250 g
- Operating temperature: -20 to +65 °C
- Ingress protection: IP68
- GNSS signals tracked: GPS/QZSS L1C/A, L2C, GLONASS L1OF, L2OF, Beidou B1l, B2l, Galileo E1-B/C, E5b
- Number of channels: 184
- Update rates: 5 Hz
- UHF LoRa radio: no
- Internal modem: no
- Bluetooth: 4.2
- Battery: Li-Ion 5200 mAh, 3,6V
- Charging: USB-C 5V 2A
- Position output: NMEA
- Corrections: RTCM3
- RTK horizontal precision:7 mm + 1 ppm
- RTK vertical precision: 14 mm + 1 ppm
- Convergence time: about 5s typically
The GNSS receiver comes in a nice box with a USB-C cable.